A design concept for a workbench.
Be sure to like Chief’s Shop on Facebook!
Make Some Sawdust!
Chief
Sketch of the Day: Outdoor Workbench #woodworking #chiefsshop
An outdoor workbench design concept.
Be sure to like Chief’s Shop on Facebook!
Make Some Sawdust!
Chief
Sketch of the Day: Narrow Work Bench #woodworking #chiefsshop
A narrow work bench design concept.
Be sure to like Chief’s Shop on Facebook!
Make Some Sawdust!
Chief
Sketch of the Day: First Workbench #chiefsshop #sketchoftheday
A design concept for a first workbench.
Be sure to like Chief’s Shop on Facebook!
Make Some Sawdust!
Chief
Sketch of the Day: Workbench #woodworking #chiefsshop
A workbench design concept with a bottom shelf and a small back shelf.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”. Free woodworking plans available here and more Sketch of the Day images available here.
Make Some Sawdust!
Chief
Sketch of the Day: Shop Work Center
This concept is in response to a blog request. The idea is that it serves as a hub for a shop, allowing for a coffee pot and/or a small microwave on top, then room in the drawers for various things, as well as storage underneath.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”.
Make Some Sawdust!
Chief
Sketch of the Day: Wall-Mounted Work Table
I was recently asked about a solution for a small workshop including a concept like this wall-mounted work table. Unlike many I’ve seen, this one includes four legs instead of two. I would of course add a lot more structural support to the legs and probably would add rails to that the front set and back set were each one assembly. I also feel that some sort of storage is needed underneath the top (perhaps with doors), so that would be added as well.
Be sure to like Chief’s Shop on Facebook! At 1,500 likes someone will be selected to receive a box of 500 Kreg pocket hole screws.
Make Some Sawdust!
Chief
Plan of the Week: Assembly Bench
The Chief’s Shop Assembly Bench would add a large (roughly 4 x 6) work surface to your shop. It’s a bit lower than a workbench to allow you to assemble projects (hence the name) in relative comfort. A table saw/circular saw, miter saw, jigsaw, drill driver, and Kreg Jig are needed to complete it.
Click the image below to download the plan.
Be sure to e-mail me with any questions and let me know what you think – chief@chiefs-shop.com.
Don’t forget to like Chief’s Shop on Facebook! At 1,500 likes someone will be selected to receive a box of 500 Kreg pocket hole screws!
Make Some Sawdust!
Chief
Plan of the Week: Basic Workbench
The Chief’s Shop Basic Workbench is a solid all-purpose bench. It’s nothing fancy, but it’ll add some room for your small projects, plus a bit of storage on the bottom shelf. A miter saw, circular saw with a straightedge guide, such as the Kreg Rip-Cut, a jig saw, drill/driver, and Kreg pocket hole jig are all you need to build it.
Click the image below to download the plan.
Be sure to e-mail me with any questions and let me know what you think – chief@chiefs-shop.com.
Don’t forget to like Chief’s Shop on Facebook! At 500 likes someone will be selected to receive a Kreg Mini Pocket-Hole Jig Kit or a box of 500 pocket hole screws. The person who recommended Chief’s Shop to the winner will also receive the same prize.
Make Some Sawdust!
Chief
Sketch of the Day: Assembly Bench
This assembly bench is a companion piece to the basic workbench concept. The work surface is roughly 4 x 6.
Don’t forget to like Chief’s Shop on Facebook! At 500 likes someone will be selected to receive a Kreg Mini Pocket-Hole Jig Kit or a box of 500 pocket hole screws. The person who recommended Chief’s Shop to the winner will also receive the same prize.
Make Some Sawdust!
Chief
Chief's Shop 
