My miter saw stand project plan is a bit complicated, so I’ve been wanting to create a much simpler version. This miter saw stand concept is actually three separate pieces. Because most folks have small shops and need space, I created the “wings” of this concept as individual components that could be pulled away and used as a workstation.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”. Free woodworking plans available here.
Make Some Sawdust!
Chief
The Chief’s Shop Miter Saw Stand Base with Hood is Part Three of a three-part project for a miter saw stand. The first installment was the base and the second was extensions. A table saw, miter saw, jigsaw, drill/driver and Kreg Jig® are all you need to build it.
This project, including the other two installments, was a Viewers’ Choice Sketch of the Day from back in December 2012.
Click the image below to access the plan page and a pdf download.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”.
Make Some Sawdust!
Chief
The Chief’s Shop Miter Saw Stand Base with Extensions is Part Two of a three-part project for a miter saw stand. The first installment was the base and the last is a hood for the back. A table saw with taper jig or jig saw, miter saw, drill/driver and Kreg Jig® are all you need to build it.
This project, including the other two installments, was a Viewers’ Choice Sketch of the Day from back in December 2012.
Click the image below to access the plan page and a pdf download.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”.
Make Some Sawdust!
Chief
The Chief’s Shop Miter Saw Stand Base is Part One of a three-part project for a miter saw stand. The remaining installments include extensions for the sides, as well as a hood for the back. A miter saw, drill/driver and Kreg Jig® are all you need to build it.
This project, including the other two installments, was a Viewers’ Choice Sketch of the Day from back in December 2012.
Click the image below to access the plan page and a pdf download.
Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”.
Make Some Sawdust!
Chief
I may have gotten a little carried away with this miter saw stand concept, the second of the Viewers’ Choice sketches.
You can clearly see the extensions that feature a fence. The extensions are supported by two gate-style arm assemblies on each side.
What’s the thing on top? It’s a hood to help contain dust. Near the back of the platform you’ll notice a hole, which is a port for a shop vacuum hose. The hood itself would create a very dark box by itself, so I created large slots to allow in light. The the inside would be covered with acrylic sheets in order to close off the hood.
The base is designed so that casters could be attached underneath.
Be sure to like Chief’s Shop on Facebook! At 1,500 likes someone will be selected to receive a box of 500 Kreg pocket hole screws.
Make Some Sawdust!
Chief
Chief's Shop Hat
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 | 14 | 15 | 16 | 17 | 18 | 19 |
| 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| 27 | 28 | 29 | 30 | 31 | ||
Chief's Shop 