Plan of the Week: Kid’s Multi-Stool #woodworking #chiefsshop #kregjig

The Chief’s Shop Kid’s Multi-Stool is designed to be used in four different orientations for children to used as a seat, a table, a stool, a tote or a place to play with toys. Assembly requires a Kreg Pocket Hole Jig.

Lumber required includes a 3/4-inch x 4- x 4-feet sheet of plywood (yields 2). Overall  dimensions:16-1/2 inches wide x 13 inches deep x 12 inches high (depends on orientation)

Click the link below the image to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week: Simple 2×4 Desk #woodworking #chiefsshop #kregjig #DIY

The Chief’s Shop Simple 2×4 Desk makes a good starter desk project and is perfect for back-to-school time. Assembly requires a Kreg Pocket Hole Jig.

Lumber required includes one 2x4s, 1x2s and 3/4-inch plywood. Overall dimensions: 49-1/2 inches wide x 25-1/2 inches deep x 30 inches high

You’ll need a miter saw, drill driver and Kreg Jig to build it.

Click the link below the image to access the plan page and a pdf download.

http://chiefs-shop.com/html/simple_2x4_desk.html

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week: Angled Trellis #woodworking #chiefsshop #kregjig

The Chief’s Shop Angled Trellis is perfect for cucumbers and other climbing fruit and vegetable plants. By not being imbedded into the ground, it could be moved season to season Assembly requires a Kreg Pocket Hole Jig.

Lumber required includes 10 2x4s. Overall dimensions: 39 inches wide x 59 1/4 inches deep x 61 3/4 inches high

You’ll need a table saw, miter saw, drill driver and Kreg Jig to build it.

Click the image below to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week: Decorative Raised Planter #kregjig #woodworking #chiefsshop

The Chief’s Shop Decorative Raised Planter can be used as a vegetable or flower planter. The decorative diamond shapes are optional, but do add a nice touch. Assembly requires a Kreg Pocket Hole Jig.

Lumber required includes one 2×2, one 4×4, and several 2x6s. You’ll need roughly 11 cubic feet of soil to fill it. Overall dimensions: 52 inches wide x 52 inches deep x 12 1/2 inches high

You’ll need a miter saw, drill driver, and Kreg Jig to build it.

Click the image below to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week: Simple Rustic Chair #woodworking #kregjig

The Chief’s Shop Simple Rustic Chair makes a nice accent piece for a country/cottage kitchen, and would also look nice on a front porch. Add a small pillow for a bit more comfort. Assembly requires a Kreg Pocket Hole Jig.

Lumber required includes one 2×6 and one 2×12. Overall dimensions: 22 1/2 inches wide x 19 1/2 inches deep x 36 inches high

You’ll need a miter saw, drill driver, and Kreg Jig to build it.

Click the image below to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week Best of 2014: Kitchen Utility Stool #woodworking #kregjig

I’m posting the top five most popular Plans of the Week for 2014. This kitchen utility stool is the third most popular for 2014. Assembly requires a Kreg Pocket Hole Jig. Click on the image to access the plan.

Be sure to like Chief’s Shop on Facebook! Prizes are awarded at various levels of “likes”. Free woodworking plans available here.

Make Some Sawdust!

Chief

Plan of the Week: 2×4 Throne #woodworking #kregjig

The Chief’s Shop 2×4 Throne makes an interesting statement piece for a casual setting. All parts are cut from 2x4s and most assembly requires a Kreg Pocket Hole Jig.

Lumber required includes a total of 10 2x4sOverall dimensions: 31 1/2 inches wide x 27 1/2 inches deep x 45 1/2 inches high

You’ll need a miter saw, drill driver, and Kreg Jig to build it.

Click the image below to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.

Make Some Sawdust!

Chief

Plan of the Week: Deck Side Table #woodworking #kregjig

The Chief’s Shop Deck Side Table can work for any side table application, either indoors or out. The curved designs gives it a unique look, and will impress anyone admiring this project.

Lumber required includes: 2x4s, 2x2s, 1x6s and 1x4s. Overall dimensions: 29 inches wide x 22 inches deep x 23 1/4 inches high

You’ll need a table saw, miter saw, jigsaw, drill driver, and Kreg Jig to build it.

Click the image below to access the plan page and a pdf download.

For more free woodworking plans, head over to my Plans page.
Make Some Sawdust!

Chief