Chief's Shop

Sketch of the Day: Rustic Buffet

Chris Hill — Tue, 29 May 2012 11:00:36 +0000

This would be a simple build. This rustic buffet uses some of the same construction as appears in some of my other rustic project plans.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Sketch of the Day: A-Frame Bench

Chris Hill — Mon, 28 May 2012 11:00:01 +0000

It has a couple tricky angles, but beyond that, this A-Frame Bench would be relatively easy to build.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Scrap Wood Project: Paw Print

Chris Hill — Mon, 28 May 2012 00:35:56 +0000

Another dog-related pattern. This paw print is a partner template for the dog bone from last week. Click on the image below for patterns in four sizes. Use up that scrap wood!

Don’t forget to like Chief’s Shop on Facebook!

Make Some Sawdust!

Chief

Chief’s Shop Quick Look: Kreg Jig HD

Chris Hill — Sat, 26 May 2012 17:33:47 +0000

Kreg is launching an update to its pocket hole jig in the form of a beefier system for 1 1/2-inch and larger stock.

The Kreg Jig HD is a completely new pocket hole system that bores a larger hole and uses larger screws that Kreg says results in a joint that is 50 percent stronger than previous pocket hole joinery.

Out of the box it’s easy to see the difference. The drill bit is much larger in diameter (25 percent bigger).

And of course, the hole diameter drilled is significantly bigger.

Which accommodate the larger HD screws.

It comes with a quick-start guide describing assembly. The stop block itself requires no hardware – it simply slides in place (with a bit of encouragement).

There are two methods shone for setting the stop collar on the bit. One simply indicates spacing the collar 4 3/4″ from the bit shoulder, the other recommends inserting the bit fully into the jig and placing a nickel (1/16″ space) between the end of the bit and the stop block. I found the nickel spacer to cause the bit to drill too deep.

I also checked the bit against my other Kreg Jig for depth for 1 1/2-inch stock and found the 4 3/4″ recommendation to match.

Driving the larger screws worked fine. I did torque up a bit more than I would for the regular 2 1/2-inch screws, but not by a drastic amount. They’re self-tapping screws, so no surprise there. They do require a #3 square drive bit, which is included).

Kreg sees this new jig (and screws) being used for larger dimension outdoor projects, specifically calling out rail to post connections (2×4 to 4×4), drilling the holes on either the 2x or 4x material. They also recommend it for outdoor furniture and workbenches.

One caveat: Included in the packaging is a yellow slip of paper recommending you check with local building codes before using the jig to building load bearing structures (interior walls, deck railings, etc.).

I plan to design and build some large outdoor projects using the new HD – in fact I’ve a few in the hopper that could probably benefit from these stronger screws. At the least, I think I’d be able to use fewer screws on certain joints.

Details:

Compatible with Kreg Jig and Kreg Jig Master System bases (stop block must be removed)

Price: Jig $59.99, 35 HD screws $4.49, 125 HD screws $19.99

http://www.kregtool.com/Kreg-Jig-HD-Prodview.html

http://www.kregtool.com/HD-Pocke-tHole-Screws-Prodview.html

Jig package includes: jig and stop block, drill bit and stop collar, #3 square drive bit, 10 screws

Availability: Summer 2012

Sketch of the Day: Patio Chair

Chris Hill — Fri, 25 May 2012 11:00:47 +0000

I picked up some of the design from the grill side table and patio buffet table to create this patio chair. Add a nice cushion for the back, and you could probably lounge in this chair all day.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Plan of the Week: Cabin Chair

Chris Hill — Thu, 24 May 2012 11:30:55 +0000

The Chief’s Shop Cabin Chair is a simple, yet very sturdy piece. Use it as an accent chair for a rustic touch, or make several and use them in a sunroom or even as part of a dining set. Tools needed include a miter saw/circular saw, jig saw, drill/driver, and a Kreg Pocket Hole Jig.

Click the image below to download the plan.

Be sure to e-mail me with any questions and let me know what you think – chief@chiefs-shop.com.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Sketch of the Day: Patio Buffet Table

Chris Hill — Thu, 24 May 2012 11:00:39 +0000

This design is a modification of the grill side table, and is roughly 7 feet long. I picture this patio buffet table in the same setting – covered in a spread fresh off the grill.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Sketch of the Day: Grill Side Table

Chris Hill — Wed, 23 May 2012 11:00:32 +0000

The grill side table concept is exactly that – a side table to place next to a grill. It’s a 33 1/3 inches high, so it’s between tabletop and countertop height.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Sketch of the Day: Party Tray

Chris Hill — Tue, 22 May 2012 11:00:39 +0000

A few details added to this tray allows for more careful carrying of objects – perfect for the variety of items needed during a party.

In the first image, you can see where beverages or condiments can be placed.

And in this view, you can see where utensils and napkins can rest.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief

Sketch of the Day: Occasional Table

Chris Hill — Mon, 21 May 2012 11:00:46 +0000

An all-purpose table made from 2x material. It could be used in a hall, foyer, or in a living room as a sofa table.

Don’t forget to like Chief’s Shop on Facebook! At 750 likes someone will be selected to receive a custom woodworking plan of their choosing.

Make Some Sawdust!

Chief